3 inch Body Lift Kit - Daihatsu Rocky/Sportrax/Feroza/F300/F310

£84.48

3 inch Body Lift Kit - Daihatsu Rocky/Sportrax/Feroza/F300/F310.

All the parts are contained in this kit to raise a Daihatsu Rocky, Sportrax or Feroza body by a nominal 3 inch including a 2 inch transfer lever extension

IMPORTANT
If you are buying a transfer lever extension to go with this kit please check the size of your transfer lever thread before ordering - Daihatsu used both 8mm and 10mm

Raising your body will enable you to fit bigger diameter tyres allowing you more clearance under the vehicle.

The 3 inch kit kit may need additional modification to hoses and cables, but nothing major - general instructions can be found Here and you'll find some FAQs Here.

We are also quite happy to answer questions on the phone, our phone number is +44 (0) 20 3598 2107 (sorry english only)

Spacers:

  • Polystone™ Grade 500, high density polyethylene
  • Excellent resistance (no attack) to dilute and concentrated Acids, Alcohols and Bases.
  • Good resistance (minor attack) to Aldehydes, Esters, Aliphatic and Aromatic Hydrocarbons, Ketones and Mineral and Vegetable Oils.
  • Limited resistance (moderate attack and suitable for short term use only) to Halogenated Hydrocarbons and Oxidizing Agents.
  • Maximum Temperature: 248°F 120°C
  • Minimum Temperature: -148°F -100°C
  • Melting Point: 266°F 130°C
  • Tensile Strength: 4550 psi (31.37 N/mm2)
  • Hardness: SD65
  • UV Resistance: Poor
  • Translucent
  • Rigid
  • Specific Gravity: 0.95

Bolts & Nuts

8.8 high tensile steel bolts
NyLoc nuts

Torque settings

All Bolts 50Nm

Fitting

Refer to the general fitting page, remove the fan/radiator cowling (if fitted) before lifting.
The transfer lever can either have a 10mm x 1.25 pitch thread or a 8mm x 1.25 thread, please check before ordering

This kit will fit:

Diahatsu F300
Diahatsu F310
Diahatsu Rocky
Diahatsu Sportrak
Diahatsu Foroza
Years:
1987 - 1998