£313.20

4.5 inch Mega Body Upgrade Kit - Discovery 1 NOT A FULL KIT.
[LR-Dy-1-MU-4]

Available Options:

Brake Hose Colour - Select:

Brake Hose Length - Front:

Brake Hose Length - Rear:

Brake Hose Number Front:

Brake Hose Number Rear:

Bumper Relocation Plates:

Transfer Lever Extension:

4.5 inch Mega Ugrade Lift Kit - Discovery 1 NOT A FULL KIT.

If you've only bought a 10 block kit then this kit contains the extra parts needed to finish raising your truck's body by a nominal 3 inch and includes the following:

  • 4 extra spacers
  • Seat belt tie rods
  • Radiator support pins
  • Bumper relocation plates
  • 2 inch transfer lever extension
  • 4 inch fuel hose extension tube plus clips
  • Set of extended brake hoses


Options are available above to choose the number of brake hoses you require and their length (standard length included will be +4.5") You can specify up to +8" at no extra charge, or none if you wish (this option will reduce the price you pay). You can also select a full set of bumper relocation plates, rear only or none. These plates are only designed for the standard bumper and are not suitable for heavy winch (bull) bumpers.
Raising your body will enable you to fit bigger diameter tyres allowing you more clearance under the vehicle.

Generic instructions can be found Here and you'll find some FAQs Here.

We are also quite happy to answer questions on the phone, our phone number is +44 (0) 20 3598 2107 (sorry english only)

Spacers:

Polystone™ Grade 500, high density polyethylene:
  • Excellent resistance (no attack) to dilute and concentrated Acids, Alcohols and Bases.
  • Good resistance (minor attack) to Aldehydes, Esters, Aliphatic and Aromatic Hydrocarbons, Ketones and Mineral and Vegetable Oils.
  • Limited resistance (moderate attack and suitable for short term use only) to Halogenated Hydrocarbons and Oxidizing Agents.
  • Maximum Temperature: 248°F 120°C
  • Minimum Temperature: -148°F -100°C
  • Autoclavable: No
  • Melting Point: 266°F 130°C
  • Tensile Strength: 4550 psi (31.37 N/mm2)
  • Hardness: SD65
  • Rigid
  • Specific Gravity: 0.95

Bolts & Nuts

8.8 high tensile steel bolts
NyLoc nuts

Torque settings

All Bolts 50Nm

Radiator Support Pins

Aluminium

Seat belt Tie Rods

Steel/studding - welded construction

Fitting

Refer to the general fitting page, remove the fan/radiator cowling (if fitted) before lifting.

You will need extended brake hoses to fit this kit (see our brake hoses)

This kit will fit:

Land Rover Discovery Series 1
Years:
1989 - 1999

FAQs

Please check out our FAQs Here

Vehicle Specific FAQs:

Customer Reviews (view all 0 reviews)

Write Review
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Google Buzz Share on Digg
0 items
Currencies
Skype Us