1 inch Body Lift Kit - HiLux Surf 130 series

  • Model:THS-130-1

$144.68AUD

1 inch Body Lift Kit - HiLux Surf 130 series.

 

All the parts are contained in this kit to raise your Surf's body by a nominal 1 inch

 

Raising your body will enable you to fit bigger diameter tyres allowing you more clearance under the vehicle.

 

The 1 inch kit, along with our 2 inch kit, is the easiest of our kits to fit needing only the modification or removal of the fan cowling on the radiator - general instructions can be found Here and you'll find some FAQs Here.

We are also quite happy to answer questions on the phone, our phone number is +44 (0) 20 3598 2107 (sorry english only)

Spacers:

Polystone™ Grade 500, high density polyethylene:
  • Excellent resistance (no attack) to dilute and concentrated Acids, Alcohols and Bases.
  • Good resistance (minor attack) to Aldehydes, Esters, Aliphatic and Aromatic Hydrocarbons, Ketones and Mineral and Vegetable Oils.
  • Limited resistance (moderate attack and suitable for short term use only) to Halogenated Hydrocarbons and Oxidizing Agents.
  • Maximum Temperature: 248°F 120°C
  • Minimum Temperature: -148°F -100°C
  • Melting Point: 266°F 130°C
  • Tensile Strength: 4550 psi (31.37 N/mm2)
  • Hardness: SD65
  • Rigid
  • Specific Gravity: 0.95

Bolts & Nuts

8.8 high tensile steel bolts
NyLoc nuts

Torque settings

All Bolts 50Nm

FAQs

Please check out our FAQs Here

Vehicle Specific FAQs: