3 inch Mega Body Lift Kit - Mazda 'B' Series/Marvie/Bravo - SC

  • Model:M-B-SC-3

457.79€ 412.01€

Available Options

3 inch Mega Body Lift Kit - Mazda 'B' Series/Marvie/Bravo - Single Cab.
This kit contains everything you need to raise your Mazda 'B' Series/Marvie/Bravo by a nominal 3 inch

This kit is packed with:

  • Lifting spacers and new bolts
  • A complete set of 5 performance brake hoses in the colour of your choice
  • Extended clutch hose
  • Steering spacers and bolts
  • Front bumper relocation blocks
  • Set of extension tubes for water and fuel
  • Set of hose clips for the tubes
  • A 3 inch transfer lever extension


Raising your body will enable you to fit bigger diameter tyres allowing you more clearance under the vehicle.

Fitting of this kit is fairly straight forward - further instructions can be found Here and you'll find the FAQs Here.

We are also quite happy to answer questions on the phone, our phone number is +44 (0) 20 3598 2107 (sorry English only)

Polystone™ Grade 500, high density polyethylene:
  • Excellent resistance (no attack) to dilute and concentrated Acids, Alcohols and Bases.
  • Good resistance (minor attack) to Aldehydes, Esters, Aliphatic and Aromatic Hydrocarbons, Ketones and Mineral and Vegetable Oils.
  • Limited resistance (moderate attack and suitable for short term use only) to Halogenated Hydrocarbons and Oxidizing Agents.
  • Maximum Temperature: 248°F 120°C
  • Minimum Temperature: -148°F -100°C
  • Melting Point: 266°F 130°C
  • Tensile Strength: 4550 psi (31.37 N/mm2)
  • Hardness: SD65
  • Rigid
  • Specific Gravity: 0.95

Bolts & Nuts

8.8 high tensile steel bolts
NyLoc nuts

Torque settings

All Bolts 50Nm

Brake Hoses

  • Stainless steel braided Teflon™ hose
  • Bonded PVC protective wipe-clean outer sheath
  • Stainless steel CNC machined fittings
  • New banjo bolts and copper washers
    Enhanced braking

Fitting

Refer to the general fitting page, remove the fan/radiator cowling (if fitted) before lifting.