2 inch Body Lift Kit - NP300 (D23) Navara - Double Cab.

£126.54

2 inch Body Lift Kit - Nissan Navara NP300 (D23) - Double Cab.

The third generation Navara, codenamed the D23 and released as the NP300 Navara is the latest of Nissan's pick up trucks, currently only available as a Double Cab, our body lift kit contains the parts to raise this truck's body by a nominal 2 inch

Lifting Spacers
New Extended Bolts
Washers and Spring Washers

Raising your body will enable you to fit bigger diameter tyres allowing you more clearance under the vehicle.

The 2 inch kit is the easiest of our kits to fit needing only the modification or removal of the fan cowling on the radiator

We are also quite happy to answer questions on the phone, our phone number is +44 (0) 20 3598 2107 (sorry english only)

Spacers:

Polyston™ Grade 500, high density polyethylene:

Excellent resistance (no attack) to dilute and concentrated Acids, Alcohols and Bases.
Good resistance (minor attack) to Aldehydes, Esters, Aliphatic and Aromatic Hydrocarbons, Ketones and Mineral and Vegetable Oils.
Limited resistance (moderate attack and suitable for short term use only) to Halogenated Hydrocarbons and Oxidizing Agents.
Maximum Temperature: 248°F 120°C
Minimum Temperature: -148°F -100°C
Melting Point: 266°F 130°C
Tensile Strength: 4550 psi (31.37 N/mm2)
Hardness: SD65
Rigid
Specific Gravity: 0.95

Bolts & Nuts

8.8 high tensile steel bolts
NyLoc nuts

Torque settings

All Bolts 50Nm

Fitting

Please check the contents of the kit ensuring that the bolts are the correct diameter and at least 50mm longer than your originals as soon as you get the kit and before beginning the lift , remove the fan/radiator cowling (if fitted) before lifting.

This kit will fit:

Nissan NP300
Nissan NP300 Navara
Mercedes-Benz X-Class
Renault Alaskan
Dongfeng Ruiqi 6/Rich 6 (China)

Years: