3 inch Mega Body Lift Kit - L200 2005 - 2015 (new shape) - Double Cab.Please note: The image shown above is not representitive of this kit, please see description below for what is in the kit.
All the parts are contained in this kit to raise your truck's body by a nominal 3 inch including a 3 inch transfer lever extension
Contained in this kit will be:
The lower linkage of the steering needs to be cut and our spacer welding into place - this should be done by a competent welder. Alternatively we can offer a service whereby you send us your lower steering linkage and we will return it with the spacer welded in: Welding Services:Send with Order: You send us your bottom steering linkage, we modify and weld it and send it to you with your order.Send After Order: You send your bottom steering linkage when you start on the lift, we modify and weld it and return it to you(choose options above)
We are also quite happy to answer questions on the phone, our phone number is +44 (0) 20 3598 2107 (sorry English only)
8.8 high tensile steel bolts
All Bolts 50Nm
Refer to the general fitting page, remove the fan/radiator cowling (if fitted) before lifting.
B40 variants of the L200 are fitted with super select transfer boxes, this necessitates alteration of the transfer lever, due to the super select transfer lever operating through about 90º and the 2 wheel drive position of the lever being at 45º.Remove gear (manual only) and transfer lever, cut a “V” notch, about three quarters of the way
through, in the front of them as near to the ball as possible, bend the lever forwards to the most suitable position and then weld into position,
The mini A bar containing the number plate on the front bumper of the Warrior is bolted to the front of the chassis legs these bolts (4 in number) have to be removed before lifting the body (we can make and supply plates to re-affix the mini A bar)
Some other models may also have struts fixed between the front bumper and chassis - again these should be removed before lifting the body.
Please check out our FAQs Here
I've been told that is is not possible/too complicated to do a big body lift on a B40
We have researched the B40 and worked to produce a kit that contains everything needed to lift a B40 by upto 4" - this is it. It has been fitted by us to a B40 so we know it works, there is none of the steering tightness associated with other kits.