3 inch Body Lift Kit - Complete - Discovery 1.

A$337.92 A$304.12

3 inch Body Lift Kit - Discovery 1.

This kit contains the spacers and bolts to raise your truck's body by a nominal 3 inch it also includes seat belt tie rods, radiator support pins and rear floor support spacers.

Raising your body will enable you to fit bigger diameter tyres allowing you more clearance under the vehicle.

The 75mm kit requires extra modification to your truck. See the FAQs for a full list. However we will stress that this will not be major - further instructions can be found Here and you'll find some FAQs Here.

We are also quite happy to answer questions on the phone, our phone number is +44 (0) 20 3598 2107 (sorry english only)

Spacers:

Polystoneâ„¢ Grade 500, high density polyethylene:
  • Excellent resistance (no attack) to dilute and concentrated Acids, Alcohols and Bases.
  • Good resistance (minor attack) to Aldehydes, Esters, Aliphatic and Aromatic Hydrocarbons, Ketones and Mineral and Vegetable Oils.
  • Limited resistance (moderate attack and suitable for short term use only) to Halogenated Hydrocarbons and Oxidizing Agents.
  • Maximum Temperature: 248°F 120°C
  • Minimum Temperature: -148°F -100°C
  • Melting Point: 266°F 130°C
  • Tensile Strength: 4550 psi (31.37 N/mm2)
  • Hardness: SD65
  • Rigid
  • Specific Gravity: 0.95

Bolts & Nuts

8.8 high tensile steel bolts
NyLoc nuts

Torque settings

All Bolts 50Nm

Radiator Support Pins

Aluminium

Seat belt Tie Rods

Steel/studding - welded construction

Fitting

Refer to the general fitting page, remove the fan/radiator cowling (if fitted) before lifting.



This kit will fit:

Land Rover Discovery Series 1
Land Rover Discovery Series 2
Years:
1989 - 2004

FAQs

Please check out our FAQs Here

Vehicle Specific FAQs: