4 inch Body Lift Kit - Daihatsu Fourtrak/Rocky/Rugger/F70.

166.11€

4 inch Body Lift Kit - Daihatsu Fourtrak/Rocky/Rugger/F70.

Contained in this kit will be:

  • Set of 10 spacers with bolts, washers and spring washers
  • Set of Steering Spacers
  • 3" Universal Transfer Lever

Raising your body will enable you to fit bigger diameter tyres allowing you more clearance under the vehicle.

The 4 inch kit may need extra modification but usually not anything serious

We are also quite happy to answer questions on the phone, our phone number is +44 (0) 20 3598 2107 (sorry english only)

Spacers:

  • Polystone™ Grade 500, high density polyethylene
  • Excellent resistance (no attack) to dilute and concentrated Acids, Alcohols and Bases.
  • Good resistance (minor attack) to Aldehydes, Esters, Aliphatic and Aromatic Hydrocarbons, Ketones and Mineral and Vegetable Oils.
  • Limited resistance (moderate attack and suitable for short term use only) to Halogenated Hydrocarbons and Oxidizing Agents.
  • Maximum Temperature: 248°F 120°C
  • Minimum Temperature: -148°F -100°C
  • Melting Point: 266°F 130°C
  • Tensile Strength: 4550 psi (31.37 N/mm2)
  • Hardness: SD65
  • UV Resistance: Poor
  • Translucent
  • Rigid
  • Specific Gravity: 0.95

Bolts & Nuts

8.8 high tensile steel bolts
NyLoc nuts

Torque settings

All Bolts 50Nm

Fitting

Refer to the general fitting page, remove the fan/radiator cowling (if fitted) before lifting.
The transfer lever can either have a 10mm x 1.25 pitch thread or a 8mm x 1.25 thread, please check before ordering

This kit will fit:

Diahatsu F70/F80
Diahatsu F75/85
Diahatsu Rugger
Diahatsu Rocky
Diahatsu Fourtrack(UK)
Diahatsu Hiline/Foroza (RWD Version, Indonesia)
Diahatsu Taft (4WD Version, Indonesia)
Toyota Blizzard (LD20)
Years:
1984 - 2002