3 inch Mega Body Lift Kit - Ranger(Eu.)/Raider/Marvie/Bravo - SC

  • Model:FRM-SC-3

454.79€ 409.01€

Available Options

3 inch Mega Body Lift Kit - Ranger(Eu.)/Raider/Marvie/Bravo - Single Cab.
This kit contains everything you need to raise your Ford Ranger/Raider or Mazda Marvie/Bravo by a nominal 3 inch

This kit is packed with:

  • Lifting spacers and new bolts
  • A complete set of 5 performance brake hoses in the colour of your choice
  • Extended clutch hose
  • Steering spacers and bolts
  • Front bumper relocation blocks
  • Set of extension tubes for water and fuel
  • Set of hose clips for the tubes
  • A 3 inch transfer lever extension
  • And importantly a huge saving on price compared to buying everything separately


Raising your body will enable you to fit bigger diameter tyres allowing you more clearance under the vehicle.

Fitting of this kit is fairly straight forward - further instructions can be found Here and you'll find the FAQs Here.

We are also quite happy to answer questions on the phone, our phone number is +44 (0) 20 3598 2107 (sorry English only)

Polystoneâ„¢ Grade 500, high density polyethylene:
  • Excellent resistance (no attack) to dilute and concentrated Acids, Alcohols and Bases.
  • Good resistance (minor attack) to Aldehydes, Esters, Aliphatic and Aromatic Hydrocarbons, Ketones and Mineral and Vegetable Oils.
  • Limited resistance (moderate attack and suitable for short term use only) to Halogenated Hydrocarbons and Oxidizing Agents.
  • Maximum Temperature: 248°F 120°C
  • Minimum Temperature: -148°F -100°C
  • Melting Point: 266°F 130°C
  • Tensile Strength: 4550 psi (31.37 N/mm2)
  • Hardness: SD65
  • Rigid
  • Specific Gravity: 0.95

Bolts & Nuts

8.8 high tensile steel bolts
NyLoc nuts

Torque settings

All Bolts 50Nm

Brake Hoses

  • Stainless steel braided Teflonâ„¢ hose
  • Bonded PVC protective wipe-clean outer sheath
  • Stainless steel CNC machined fittings
  • New banjo bolts and copper washers
    Enhanced braking

Fitting

Refer to the general fitting page, remove the fan/radiator cowling (if fitted) before lifting.