2 inch Body Lift - Ranger Wildtrak/Limited/XLT/XL - DC

  • Model:FR-T6-2

186.31€

2 inch Body Lift - Ranger Wildtrak/Limited/XLT/XL - DC

2 inch Body Lift Kit - Ranger Wildtrak/Limited/XLT/XL - Double Cab.

This kit is for the Ford Ranger (T6), Wildtrak, Limited, XLT and XL models Contained in this kit will be:

  • Body Lift kit
  • 2" Transfer Lever Extension

Please note that no bumper relocation plates or brake hoses are included in this kit
Raising your body will enable you to fit bigger diameter tyres allowing you more clearance under the vehicle.

The 2 inch kit is the easiest of our kits to fit needing only the modification or removal of the fan cowling on the radiator - further instructions can be found Here and you'll find some FAQs Here.

We are also quite happy to answer questions on the phone, our phone number is +44 (0) 20 3598 2107 (sorry english only)

Polystone™ Grade 500, high density polyethylene:
  • Excellent resistance (no attack) to dilute and concentrated Acids, Alcohols and Bases.
  • Good resistance (minor attack) to Aldehydes, Esters, Aliphatic and Aromatic Hydrocarbons, Ketones and Mineral and Vegetable Oils.
  • Limited resistance (moderate attack and suitable for short term use only) to Halogenated Hydrocarbons and Oxidizing Agents.
  • Maximum Temperature: 248°F 120°C
  • Minimum Temperature: -148°F -100°C
  • Melting Point: 266°F 130°C
  • Tensile Strength: 4550 psi (31.37 N/mm2)
  • Hardness: SD65
  • Rigid
  • Specific Gravity: 0.95

Bolts & Nuts

8.8 high tensile steel bolts
NyLoc nuts

Torque settings

All Bolts 50Nm

Fitting

Refer to the general fitting page, remove the fan/radiator cowling (if fitted) before lifting.