2 inch Mega Body Lift - Mazda 'B'/Marvie/Bravo - DC

  • Model:M-B-DC-2

362.91€ 326.63€

2 inch Mega Body Lift - Mazda 'B'/Marvie/Bravo - DC

Available Options

2 inch Mega Body Lift Kit - Mazda 'B'/Marvie/Bravo - Double Cab.

This kit is for the Mazda 'B' series, Marvie and Mazda Bravo. Contained in this kit will be:

  • Body Lift kit
  • Steering spacer and bolts
  • Front Bumper lift Kit
  • 2" Transfer Lever Extension
  • Extended brake hoses (front and rear).
  • Extended brake hoses (front inner wing) Optional.


Raising your body will enable you to fit bigger diameter tyres allowing you more clearance under the vehicle.

The 2 inch kit is the easiest of our kits to fit needing only the modification or removal of the fan cowling on the radiator - further instructions can be found Here and you'll find some FAQs Here.

We are also quite happy to answer questions on the phone, our phone number is +44 (0) 20 3598 2107 (sorry english only)

Polystone™ Grade 500, high density polyethylene:
  • Excellent resistance (no attack) to dilute and concentrated Acids, Alcohols and Bases.
  • Good resistance (minor attack) to Aldehydes, Esters, Aliphatic and Aromatic Hydrocarbons, Ketones and Mineral and Vegetable Oils.
  • Limited resistance (moderate attack and suitable for short term use only) to Halogenated Hydrocarbons and Oxidizing Agents.
  • Maximum Temperature: 248°F 120°C
  • Minimum Temperature: -148°F -100°C
  • Melting Point: 266°F 130°C
  • Tensile Strength: 4550 psi (31.37 N/mm2)
  • Hardness: SD65
  • Rigid
  • Specific Gravity: 0.95

Bolts & Nuts

8.8 high tensile steel bolts
NyLoc nuts

Torque settings

All Bolts 50Nm

Brake Hoses

  • Stainless steel braided Teflon™ hose
  • Bonded PVC protective wipe-clean outer sheath
  • Stainless steel CNC machined fittings
  • New banjo bolts and copper washers
    Enhanced braking

Fitting

Refer to the general fitting page, remove the fan/radiator cowling (if fitted) before lifting.